top of page

INTENSIFIA™ is the ultimate combination of enhancer and sealer. Natural stone, masonry and other hard porous materials will have deep, long lasting color enrichment and premium water and oil-based stain protection.

 

How to use:

  • ALWAYS TEST PRODUCT ON A SMALL AREA FIRST and allow a 24-hour cure time to check results.
  • Surface must be clean, dry and free of residues.
  • Generously apply INTENSIFIA™ using low-pressure hand sprayer, clean brush or lamb’s wool applicator. Avoid contact with surrounding areas.
  • Allow for a minimum of 30 minutes for product to penetrate the surface then thoroughly polish off any excess product residue with clean, dry, white cloths, towels or similar.
  • Leave the product to cure for at least 60 minutes, then repeat steps 3 and 4. Total application rate is approximately one quart per 20-250 sq. ft (2-25 sqm) depending on surface absorption. A third coat may be required for premium stain protection on very porous surfaces.
  • Avoid contact with moisture for a minimum of 8 hours after application. Full curing takes 4 weeks.
  • Use an organic solvent for e.g. methylated spirits to clean equipment.

Notes: INTENSIFIA™ will not prevent etching from acidic liquids, or physical surface wear. The level of enhancement will vary dependent on the type of material being treated. It is advised to test on a sample piece before applying the product to your surface. Eventually, wear and tear and cleaning will affect the enhancement and sealing performance. Reapplication of the product will be needed. Once enhanced, the treated surface cannot be restored back to the original look.

 

For Full Specifications Click Here

INTENSIFIA™- DEEP ENHANCEMENT AND STAIN PROTECTION -946ML

AU$93.50 Regular Price
AU$80.00Sale Price
    Please fill this Form to send us your enquiry or call us on 1300 YSTONE

    Success! Message received.

    bottom of page